+8618159139302 material@qingyi.cn
banner

pic

07-29

What is heat transfer printing?

Heat transfer printing normally used for polyester fabric,it’s through high temperature (about 200 ℃) make disperse dyes in the printing paper heated then sublimation to the gas phase condensed on the polyester surface, and then infiltrated into fiber macromolecule no amorphous area, after cooling fixed in the fiber inside printing method.

pic

07-29

What patterns fit for plastisol ink?

Qingyi plastisol ink can be used for direct manual printing, mechanical printing, can also be used for heat transfer screen printing, PVC plastisol ink, can print plane, three-dimensional effects and other special products. Before using plastisol ink, we should pay attention to a variety of situations,only be prepared,then we can maximize plastisol ink advantages. Qingyi manufacturers here introduce for you,what patterns fit for plastisol ink.

pic

07-29

What is called heat plastisol printing ink?

PLASTISOL is a new generation of textile printing inks, because it has many advantages,in abroad it’s already largely replaced the traditional printing materials. In addition to some customers have specify requirements need use mortar, water slurry doing process, majority of printing companies have learned and extensive use plastisol ink to process high-precision products. Plastisol inks are generally made by PVC resin, plasticizer, pigments and additives,the solids content get to 100%. Usually PVC particles dispersed in the plasticizer, when heated, the resin absorbs plasticizer.Happen cross-linking reaction and curing, forming a PVC film on the fabric surface, while firmly bonded with fiber molecules.

pic

07-29

What’s the quality about oily anti-sublimation paste?

When producing personalized clothing, may because of fabric or other problems, make clothing fabrics up infiltration, heat transfer patterns can not get the desired effect, the quality is greatly affected. At this time it is very necessary need anti-sublimation paste to prevent this problem emergence, then heat transfer pattern effect will be obvious and won’t infiltrate.